There are only several things that are scarier than a flooded toilet. Sometimes, there is something specific in the pipes, but often a clogged toilet is merely a result of toilet paper.
First, flush the toilet once. If you flush more than once, more water will be added, and the floor will be overflowed. Next thing to do is to turn off the water. When you’ve turned the water off, you can flush water as many times as you want.
Tools for fixing a clogged toilet
Plunger
The job is easier with a plunger, but we know that not everyone owns a plunger. Plungers for toilet have one extra part which protrudes past the bottom. There are some instructions for that sort of plunger.
Step 1 — To make a better seal, put plunger under hot water.
Step 2 —If you can’t seal the bottom of your toilet with a plunger, use an old towel and wrap it around the base of the plunger.
Step 3 —Make sure the water is still a few inches above while pumping the plunger.
Step 4 — If the water goes down the drain after pulling the plunger up the clog is cleared. If not, continue to plunge until the water goes down.
Plumbing Snake
A plunger just isn’t enough sometimes and then follow the steps below.
Step 1 — Uncoil the wire end of the snake and place it into the drain.
Step 2 — Keep extending it until you reach the clog.
Step 3 — Shake the snake until the water starts to drain.
Vacuum
Follow the steps below for using a wet-dry vacuum.
Step 1 — Use a towel around the hose to seal the drain.
Step 2 — Put it in the drain and suck out the water.
Hot Water and Dish Soap
You already have dish soap in your home, so the materials for this method are the easiest to gather.
Step 1 — Put a teaspoon of dish soap into the bowl for about 10 minutes.
Step 2 — Fill a bowl with water and put it on the stove to boil.
Step 3 — Take it off the stove before the water comes to a complete boil.
Step 4 —Pour the hot water into the toilet bowl.
Step 5 — If the water doesn’t drain, let the soap and warm water soak in the bowl.
Vinegar and Baking Soda
Step 1 — Put some water into the bowl.
Step 2 — Put half a box of baking soda into the bowl.
Step 3 — Put a bottle of white vinegar on the baking soda.
Step 4 — Pour it into the clog for about 30 minutes.
Step 5 —Pour the hot water into the drain.
Heavy Duty Chemicals
Step 1 — Buy a bottle of drain cleaner in a grocery.
Step 2 —Pour the bottle down the drain and let the poison do its job.
Step 3 — After some time has passed, check to see if the water will go down. If it doesn’t, you’ll have to wait a little longer.
If you still can’t clear the bowl, call a plumber to remove the toilet from the wall.
Comments are closed.